3-Port FireWire Hub FH300, ATEN USB FireWire Hubs ATEN Corporate Headquarters

The Sandberg FireWire Hub can also be used to connect up to five Sony PlayStation®2 consoles, allowing players to play against each other. FireWire® is typically capable of creating network connections without the use of any external router hardware. This can usually be accomplished by simply connecting one computer to another using IEEE 1394 ports, depending on the capabilities of the operating system . A FireWire® hub may be used to increase the number of computers that can be connected to such a network. 100, 200, 400 Mbps data transfer rate; automatically uses the highest speed the peripheral supports. Needs to review the security of your connection before proceeding. Gearspace.com needs to review the security of your connection before proceeding.

Believe it or not, I was still able to do video editing on that ancient piece of equipment. I was surprised at how quickly the footage downloaded to the computer, in virtual real time.

Firewire 800 hub/port splitter

My original digital video camcorder has a Firewire plug and I also have a much smaller handheld digital camcorder that uses the Firewire technology as well. Everetra October 18, 2011 @Mammmood – I was introduced to Firewire back in the late 1990s. You are right; everything is USB nowadays, but back then Firewire was the de facto standard for downloading video. I don’t think USB was fast enough to get the job done at the time. I think you still need the hub though if you want to hook up a bunch of peripherals. When you look for a hub, see if they have power down features. Some of them will limit their power usage based on how you configure them, so that they don’t drain a lot of juice from your battery, assuming that you’re using it with your laptop.

One feature that is common among FireWire® devices is the ability to daisy chain. There is a maximum limit of how long a FireWire® cable can be, though many devices, repeaters, or hubs can be chained together to increase this length. Multiple hubs can increase the physical distance of a device from the computer it is connected to. In the same way, multiple hubs may often be chained together to greatly increase the number of devices that can be connected at once. The IEEE 1394 standard was introduced in 1995, and is commonly known by brand name such as FireWire®, i.LINK™ and Lynx™. These brand names all typically represent the same underlying technology, connectors and transfer protocols. A FireWire® hub will typically allow any IEEE 1394 device with the correct plug to be connected or chained together.

IEEE 1394b Hub/IEEE 1394b Repeater Hub/FireWire 800 Hub

I don’t think it’s as fast us the latest USB, but it’s still plenty fast for video, and I almost never skip frames when I download the footage. MicLIVE™, the industry’s first AI-optimized audio mixer, simplifies your podcast production. The computer I had was a Pentium II with 256 megabytes of RAM.

fireware hub

I never knew that you could build a network around Firewire connections alone. USB + Firewire Combo card providing ports to the back of the computer, and to the front through a drive bay. (3.97 x 3.6 x 1.31 in.)NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format. 6 IEEE 1394 ports for more convenient adding and removing of devices.

IEEE 1394b active extension cable

A FireWire® hub is a computer peripheral that can increase the number of IEEE 1394 interface devices that may be attached to a computer. Many FireWire® hubs also include universal serial bus ports, which can allow even more devices to be connected. It is often possible for a FireWire® hub to function as a repeater, allowing many hubs or other devices to be daisy chained together. Another function that these hubs may provide is to facilitate network connections, since it is often possible to create a local area network over FireWire®. Many computers have only one IEEE 1394 port, while others have none at all.

fireware hub

A FireWire® hub typically requires at least one IEEE 1394 port to function. Hubs that have both FireWire® and USB connections will typically require one of each to be plugged into the computer. If a computer lacks an IEEE 1394 port, the solution is typically to install an expansion card that includes the functionality. A FireWire® hub may then be used to expand the number of IEEE 1394 devices that can be connected to the computer.

FireWire 800 Powered Hub for Digital Back ( 3 Port )

I realize that some people think that it’s old, that everything is supposed to be USB nowadays, but I still use Firewire for my video production stuff. The editing took a long time, but the actual download was a snap. I had to use an extension card for my Firewire, like the article says, but my latest computer has that technology built in. The 1394B-HUB-3 FireWire Hub/Repeater allows you to connect 2 devices to a single computer. Quickly connect and swap FireWire scanners, storage devices, web-cams, camcorders, and other DV-compatible multimedia devices to the hub without rebooting. I have a simple hub port which allows me to plug both camcorders into the hub and gives me easier access to download the videos. Before, I used to have to connect one camera at a time, which is a hassle as you can imagine.

fireware hub

When used as a repeater, it doubles the maximum range of FireWire cable from the standard 14.75 feet to 29.5 feet. Multiple units can be cascaded to extend the range up to 236 feet. The Hub/Repeater also features circuitry specifically designed to protect your equipment from electrostatic discharge .Supports Plug-n-Play specification.

Leave a Reply

Your email address will not be published. Required fields are marked *